Dermal Filler Types Comparison Chart: What Each One Does
A dermal filler types comparison chart usually lists names like hyaluronic acid, calcium hydroxylapatite, poly-L-lactic acid and PMMA, but a chart rarely explains what those materials actually do beneath the skin. The short version is that fillers are gel-like or particle-based materials placed by a trained clinician to add volume, support or contour, and each material behaves differently over time. Because a table can hide those differences, this article describes each type in plain paragraphs instead, so you can see how the materials differ and what questions are worth bringing to a consultation.
Most people know a filler by its brand name or by the area it was used on, such as lips or cheeks. Fewer people know what is in the syringe, how long the body takes to break it down, or why two people can have quite different experiences with the same product. That gap is where most confusion starts.
What dermal fillers actually are

Dermal fillers are injectable materials designed to add fullness to specific areas of the face or hands. According to the U.S. Food and Drug Administration (FDA), soft tissue fillers are regulated as medical devices, and the FDA has approved particular products for particular areas and uses. That means a product cleared for one area is not automatically intended for another, which is a point worth raising with any provider.
Fillers are not the same thing as neuromodulators, the muscle-relaxing injections that people often group with them. Fillers add or support volume, while neuromodulators work on muscle movement. The two are sometimes used in the same visit, but they do different jobs.
The main material families
Most products fall into a handful of families. Here is how they are generally described, without ranking them, since the right fit depends on the person and the area being treated.
- Hyaluronic acid (HA): A gel based on a sugar molecule that occurs naturally in skin. It is widely used for lips, cheeks, lines around the mouth and under-eye hollows. HA products vary in thickness and flexibility, and they are generally described as temporary.
- Calcium hydroxylapatite (CaHA): Tiny mineral-like particles suspended in a gel carrier. It is typically thicker than most HA gels and is often discussed for deeper structural support, such as cheeks, jawline or hands.
- Poly-L-lactic acid (PLLA): A biocompatible, biodegradable material often described as a collagen-stimulating product rather than an immediate volumizer. Its effect is usually described as gradual.
- Polymethylmethacrylate (PMMA): Small synthetic beads in a collagen or gel carrier, generally described as a longer-lasting or semi-permanent option. Because it is not easily reversed, many clinicians treat the decision more cautiously.
- Autologous fat transfer: Technically a procedure rather than a packaged product, it uses a person’s own fat, which is harvested and re-injected. It involves a surgical step and different considerations than syringe-based fillers.
What fillers do in the skin
A useful everyday comparison is a house under renovation. Some fillers act like filler foam pushed into a gap, taking up space right away. Others act more like scaffolding, giving the body a framework to build on. Still others behave like a signal to the construction crew, nudging the skin to make more of its own support over time.
Hyaluronic acid fits the “foam in the gap” picture most closely. HA attracts and holds water, so it adds softness and volume where it is placed. Many people describe the effect as visible fairly soon after treatment, though swelling can briefly change how an area looks, and early appearance is not always the final look.
Calcium hydroxylapatite sits somewhere between foam and scaffolding. The gel gives immediate shape, while the particles are generally described as providing a surface that the body’s own cells interact with. PLLA leans further toward the “signal” end, since its role is usually described as encouraging the skin to produce collagen gradually, which is why its changes tend to appear over weeks and months rather than right away.
How the body breaks them down
Over time the body gradually metabolizes most temporary fillers. HA is broken down by natural enzymes, and there is also an enzyme-based product clinicians can use to dissolve HA fillers when needed. That reversibility is one reason HA is so commonly discussed as a starting point, though it does not make any injection risk-free, and reactions vary from person to person.
Non-HA materials generally do not have that same dissolving option. This is a practical distinction, not a judgment about quality. It simply means that planning, placement and expectations matter even more for products that are harder to adjust later.
What shapes the results
The material is only one part of the picture. Results with any filler depend on several conditions working together, and that is why a simple chart can mislead.
Where and how deeply it is placed
Different areas of the face have different needs. Thin, mobile areas like the lips generally call for softer, more flexible gels, while areas that need structural lift may use firmer products. Placing the wrong type in the wrong layer is one of the reasons clinicians stress training and anatomy knowledge. The FDA notes that filler injected into blood vessels can cause serious complications, which is a central reason technique matters so much.
Your skin, anatomy and habits
Skin thickness, age, facial structure, activity level and how your body handles the material all play a role. Two people receiving the same product in the same area can see different longevity, because metabolism and facial movement differ. For that reason, any timeline you see for a product should be read as a general pattern rather than a promise.
Product formulation
Even within hyaluronic acid, products differ in how cross-linked, thick or water-attracting they are. Those technical differences change how a gel feels, how it spreads and how long it tends to last. A clinician can explain why a particular formulation was chosen for a particular area, and it is reasonable to ask.
Provider training and setting
The FDA has cautioned consumers about fillers purchased or administered outside proper medical settings, including products that are not approved for use in the United States. Asking who will perform the injection, what their training is, and which specific product they plan to use are all fair questions. Checking that the product is an approved one is also reasonable.
Related reading: GLP-1 Medication Questions to Ask Before You Start
When a filler may not be a good fit
Fillers are elective cosmetic procedures, and they are not suitable for everyone. Some situations call for extra caution or a different approach entirely, and a qualified professional is the right person to make that call.
- People with a history of severe allergic reactions or allergies to ingredients in certain products, including some that contain lidocaine or collagen-based carriers.
- People with active skin infections, cold sores or inflammation in the area being considered.
- People with bleeding disorders or who take medications or supplements that affect bleeding, since bruising and bleeding risk may be higher.
- People with certain autoimmune conditions or a tendency toward abnormal scarring.
- People who are pregnant or breastfeeding, since information on filler use in these situations is generally limited.
Expectations matter too. Fillers can soften certain signs of aging or change facial proportions, but they do not tighten loose skin, replace surgical procedures or change the underlying structure of the face. If the goal is something a filler is not designed to do, a professional can discuss better-suited options.
Warning signs that need prompt medical attention
According to the FDA, certain symptoms after a filler injection warrant urgent medical care. These include unusual or worsening pain, skin that turns pale, white, dusky or blotchy, changes in vision, and signs of infection such as spreading redness, warmth or fever. Mild swelling, tenderness and bruising are commonly described after injections, but anything that seems severe or is getting worse should be reported to the treating provider or emergency services right away.
What to bring to a consultation
Before any treatment, a licensed professional can review your medical history, current medications, past cosmetic procedures and personal goals. It helps to ask which product they recommend and why, what the alternatives are, what can be done if you are unhappy with the result, and what follow-up looks like. Each of these questions gets you closer to a decision that fits your situation rather than a one-size-fits-all chart.
Used as a starting vocabulary, a dermal filler types comparison chart can help you recognize the names and rough differences between materials. The real decision, though, belongs in a conversation with a qualified professional who can examine you in person and explain the trade-offs for your face and your health.
Frequently asked questions
Do all dermal fillers last the same amount of time?
No, durability differs by material, and it also differs by person. Hyaluronic acid is generally described as temporary and broken down gradually by the body, while PMMA is generally described as longer-lasting, and products like PLLA work more gradually through the skin’s own response. Placement, area treated and individual metabolism all influence how long results are visible.
Can a filler be reversed if I am unhappy with it?
If the product is hyaluronic acid, an enzyme-based product exists that clinicians can use to dissolve it. Other materials generally lack a comparable option, which is why many providers approach them more cautiously. Whether reversal is appropriate in your case is a decision for the treating clinician.
Is it a problem if a product is not FDA approved?
If a filler is not approved for use in the United States, its quality, contents and safety have not been reviewed through the same process, and the FDA has warned consumers about unapproved products. It is reasonable to ask the provider for the exact product name and confirm it with an official source. Reactions vary from person to person even with approved products.
Does a thicker filler mean a better result?
Not necessarily, because the right consistency depends on the area being treated. Soft, mobile areas like the lips generally call for more flexible gels, while areas needing structure may use firmer ones. A provider can explain why a particular thickness suits a particular spot.
Disclaimer: This article is for informational purposes only and is not a substitute for professional medical advice, diagnosis, or treatment. Please consult a licensed professional for personal health decisions.


